Future Trends                                                   

How to Choose a Future-Proof PC Case for Your Next GPU Upgrade

“Future-proof” is one of the most abused phrases in PC hardware.

A manufacturer adds two extra fan mounts, calls the chassis future-ready, photographs it with a conveniently small graphics card, and suddenly buyers are expected to believe that the same 

 will comfortably swallow whatever NVIDIA, AMD, or an add-in-board partner releases three years later.

, I care less about how much unused volume exists inside the chassis today and far more about whether the design leaves measurable room for longer GPUs, thicker coolers, wider power connectors, higher thermal loads, different radiator arrangements, and motherboard standards that might become relevant during the case's useful life.

Because what good is an enormous case if the next GPU still collides with the radiator?

Future-Proofing Starts With the GPU, Not the Case

PC builders sometimes treat a case as furniture: buy something attractive now and replace everything inside it later.

That worked better when mainstream graphics cards were relatively predictable.

Modern high-end GPUs have made the calculation nastier.

NVIDIA's GeForce RTX 5090 Founders Edition provides a useful reality check. NVIDIA lists the card at 

 rating. NVIDIA also tells system builders to allow 

36 mm of additional space for power cables

 and notes that reserving clearance equivalent to another unused expansion slot can improve airflow.

That last number matters more than many buyers realize.

The GPU may physically be 137 mm wide, but the installation envelope is wider once a 12V-2x6/PCIe Gen 5 power cable has to exit the card without being crushed against the side panel.

MSI's GeForce RTX 5090 Gaming Trio OC is officially listed at 

, uses a 16-pin connector, and carries a 

That is why I strongly recommend reading ACEGEEK's guide on 

how to choose a PC case for large triple-fan GPUs

 before treating one published GPU-clearance number as proof of compatibility. The site correctly separates card length from card thickness, power-cable space, intake access, radiator intrusion, and support-bracket clearance.

The RTX 5090 Shows Why Today's Fit Is Not Tomorrow's Fit

NVIDIA introduced the Blackwell-generation GeForce RTX 50 Series at CES in January 2025. Reuters reported the announcement alongside NVIDIA's broader Blackwell push, while NVIDIA subsequently placed the RTX 5090 at a $1,999 launch price.

That price is relevant to case buying for an uncomfortable reason.

If I am putting a roughly $2,000-class GPU into a machine, I refuse to save a trivial amount on the chassis by selecting one that leaves 3 mm of clearance around the component most likely to be upgraded.

And the specifications show how quickly assumptions can fail. NVIDIA's Founders Edition uses a compact two-slot cooler design, yet an MSI partner version stretches to 359 mm and 70 mm thick.

So “RTX 5090 compatible” is almost meaningless unless the exact board model is specified.

How Much GPU Clearance Should a Future-Proof PC Case Have?

My starting target for a new high-performance ATX build is simple: 

I would strongly prefer roughly 380–400 mm or more of published GPU length clearance if the goal is genuine upgrade flexibility.

That is not because every future GPU will be 400 mm long.

It is because published clearance gets consumed.

Front radiators consume it. Fans consume it. Brackets consume it. Drive cages can consume it. Cable routing can complicate it. And the nominal number means very little if the graphics card ends one millimeter from a wall of warm radiator exhaust.

 illustrates the kind of margin I mean: examples on the site include configurations listing approximately 

, rather than designing around a barely adequate 320–340 mm envelope.

Real GPU Headroom = Case GPU Clearance − Hardware Intrusion − Desired Safety Margin

Suppose a PC case advertises 400 mm GPU clearance.

But suppose your planned configuration introduces another 25–30 mm of obstruction near the front of the card.

Now the comfortable 41 mm gap is roughly 11–16 mm.

If the chassis only offered 370 mm to begin with, the same upgrade could move from “fine” to “physically impossible.”

 warns against interpreting published maximum dimensions without considering radiator stacks, fan hardware, cable adapters, and neighboring components.

The Future-Proof PC Case Checklist I Would Actually Use

Here is the shortlist I would use before spending money.

Area to CheckWeak Upgrade PositionBetter Future-Proof TargetWhy It MattersGPU length clearance320–340 mmAround 380–400+ mmLeaves room for longer AIB cards and cooling hardwareGPU thicknessTight 2.5–3-slot fitComfortable 3.5–4-slot areaModern flagship coolers can be extremely thickGPU cable spaceSide panel nearly touches cableMeaningful side clearance beyond card widthReduces cable compression and panel interferenceIntake airflowGPU depends on recycled case airDirect front, side, or bottom intakeHigher-wattage GPUs dump far more heat into the chassisRadiator flexibilityOne usable mountMultiple top/side/front optionsPrevents future cooling upgrades from stealing GPU spacePSU areaFits current PSU tightlyRoom for longer PSU and cable bendsHigh-end GPU upgrades may require larger ATX 3.x unitsMotherboard supportOne form factorATX plus M-ATX/ITX; E-ATX where relevantExtends the chassis beyond one motherboard generationCable chamberMinimal routing depthGenerous rear routing spaceThick power cables and hubs need physical volumeExpansion-slot spaceGPU barely clears slotsAdditional usable slot spaceHelps thick GPUs, capture cards and vertical mountsService accessMajor teardown for upgradesRemovable panels and accessible filtersFuture upgrades should not require rebuilding the entire PC

I have nothing against RGB. But RGB should rank somewhere below “Will my next $1,000+ GPU actually fit?”

GPU Thickness Is Becoming as Important as GPU Length

A 350 mm graphics card inside a 400 mm case sounds comfortable until a 3.5-slot or 4-slot cooler occupies the lower half of the motherboard, approaches bottom-mounted intake fans, blocks expansion cards, and eliminates the space where an anti-sag bracket was supposed to sit.

 show why this deserves serious attention.

That is not a decorative PCIe card anymore. Mechanically, we are hanging a substantial object from the motherboard area.

So I want a case that provides room for a GPU support bracket or support pillar without forcing me to remove the fans that were supposed to cool the GPU.

Do Not Ignore GPU Width and the Power Cable

 clearance and still fail because the graphics card is too wide once its power cable is attached.

NVIDIA explicitly instructs RTX 5090 Founders Edition builders to plan about 

 beyond the card's installation envelope.

That should change how people evaluate panoramic glass cases.

If your GPU sits close to the side panel, the relevant question is not:

“Does the panel close without forcing the GPU cable into an unnecessarily aggressive bend?”

A High-Wattage GPU Turns Your PC Case Into a Thermal System

 specification is an extreme example, but it demonstrates the direction of high-end hardware: a future case must be evaluated partly by how much heat it can evacuate, not merely by what dimensions it accepts.

choosing a PC case based on GPU power draw

 makes exactly this distinction, examining case selection around 355 W, 450 W and 575 W-class GPU loads rather than treating every graphics card as the same cooling problem.

A 180 W graphics card can tolerate airflow compromises that become embarrassing once the GPU is converting hundreds of watts of electricity into heat inside the chassis.

For a future GPU upgrade, I prefer a case with at least one intake route that feeds cool room air toward the graphics card:

A panoramic PC case with intelligently positioned bottom and side fans can cool a large GPU perfectly well, while a traditional-looking chassis with a blocked front panel can perform poorly.

Radiator Support Can Quietly Destroy GPU Compatibility

That one question can completely alter the future-proof value of a PC case.

Put a thick radiator and 25 mm fans at the front of some chassis and your advertised GPU clearance shrinks.

Move the radiator to the roof and another problem appears: RAM, motherboard heatsinks, EPS cables, and tube fittings begin fighting for the same space.

why top-mounted radiators can interfere with RAM

 highlights this three-dimensional conflict. A case can technically support a radiator's length while still creating problems with DIMM height or motherboard components underneath it.

That is why my preferred upgrade path looks like this:

Top radiator with enough motherboard offset, plus unobstructed front/side/bottom GPU intake.

Side-mounted radiator that does not substantially restrict GPU intake or consume card clearance.

How to Choose a Future-Proof PC Case for Your Next GPU Upgrade

“Future-proof” is one of the most abused phrases in PC hardware.

A manufacturer adds two extra fan mounts, calls the chassis future-ready, photographs it with a conveniently small graphics card, and suddenly buyers are expected to believe that the same PC case will comfortably swallow whatever NVIDIA, AMD, or an add-in-board partner releases three years later.

I don't buy that logic.

Margins beat marketing.

When I evaluate a future-proof PC case, I care less about how much unused volume exists inside the chassis today and far more about whether the design leaves measurable room for longer GPUs, thicker coolers, wider power connectors, higher thermal loads, different radiator arrangements, and motherboard standards that might become relevant during the case's useful life.

Because what good is an enormous case if the next GPU still collides with the radiator?

That is the real problem.

Future-Proofing Starts With the GPU, Not the Case

PC builders sometimes treat a case as furniture: buy something attractive now and replace everything inside it later.

That worked better when mainstream graphics cards were relatively predictable.

Modern high-end GPUs have made the calculation nastier.

NVIDIA's GeForce RTX 5090 Founders Edition provides a useful reality check. NVIDIA lists the card at 304 mm long and 137 mm wide, with a 575 W Total Graphics Power rating. NVIDIA also tells system builders to allow 36 mm of additional space for power cables and notes that reserving clearance equivalent to another unused expansion slot can improve airflow.

That last number matters more than many buyers realize.

The GPU may physically be 137 mm wide, but the installation envelope is wider once a 12V-2x6/PCIe Gen 5 power cable has to exit the card without being crushed against the side panel.

And then we get to partner cards.

MSI's GeForce RTX 5090 Gaming Trio OC is officially listed at 359 × 149 × 70 mm, weighs 2,119 g, consumes 575 W, uses a 16-pin connector, and carries a 1,000 W recommended PSU specification.

Same GPU family.

Very different physical problem.

That is why I strongly recommend reading ACEGEEK's guide on how to choose a PC case for large triple-fan GPUs before treating one published GPU-clearance number as proof of compatibility. The site correctly separates card length from card thickness, power-cable space, intake access, radiator intrusion, and support-bracket clearance.

The RTX 5090 Shows Why Today's Fit Is Not Tomorrow's Fit

NVIDIA introduced the Blackwell-generation GeForce RTX 50 Series at CES in January 2025. Reuters reported the announcement alongside NVIDIA's broader Blackwell push, while NVIDIA subsequently placed the RTX 5090 at a $1,999 launch price.

That price is relevant to case buying for an uncomfortable reason.

If I am putting a roughly $2,000-class GPU into a machine, I refuse to save a trivial amount on the chassis by selecting one that leaves 3 mm of clearance around the component most likely to be upgraded.

The economics make no sense.

And the specifications show how quickly assumptions can fail. NVIDIA's Founders Edition uses a compact two-slot cooler design, yet an MSI partner version stretches to 359 mm and 70 mm thick.

So “RTX 5090 compatible” is almost meaningless unless the exact board model is specified.

How Much GPU Clearance Should a Future-Proof PC Case Have?

My starting target for a new high-performance ATX build is simple: I would strongly prefer roughly 380–400 mm or more of published GPU length clearance if the goal is genuine upgrade flexibility.

That is not because every future GPU will be 400 mm long.

We don't know that.

It is because published clearance gets consumed.

Front radiators consume it. Fans consume it. Brackets consume it. Drive cages can consume it. Cable routing can complicate it. And the nominal number means very little if the graphics card ends one millimeter from a wall of warm radiator exhaust.

ACEGEEK's current 2026 gaming PC case buying guide illustrates the kind of margin I mean: examples on the site include configurations listing approximately 400–410 mm GPU clearance, rather than designing around a barely adequate 320–340 mm envelope.

Use Clearance Math, Not Hope

The basic calculation is:

Real GPU Headroom = Case GPU Clearance − Hardware Intrusion − Desired Safety Margin

Suppose a PC case advertises 400 mm GPU clearance.

Your next card is 359 mm long.

At first glance:

400 − 359 = 41 mm

Looks excellent.

But suppose your planned configuration introduces another 25–30 mm of obstruction near the front of the card.

Now the comfortable 41 mm gap is roughly 11–16 mm.

Different build.

If the chassis only offered 370 mm to begin with, the same upgrade could move from “fine” to “physically impossible.”

This is precisely why ACEGEEK's full PC part compatibility guide warns against interpreting published maximum dimensions without considering radiator stacks, fan hardware, cable adapters, and neighboring components.

The Future-Proof PC Case Checklist I Would Actually Use

Here is the shortlist I would use before spending money.

Area to CheckWeak Upgrade PositionBetter Future-Proof TargetWhy It MattersGPU length clearance320–340 mmAround 380–400+ mmLeaves room for longer AIB cards and cooling hardwareGPU thicknessTight 2.5–3-slot fitComfortable 3.5–4-slot areaModern flagship coolers can be extremely thickGPU cable spaceSide panel nearly touches cableMeaningful side clearance beyond card widthReduces cable compression and panel interferenceIntake airflowGPU depends on recycled case airDirect front, side, or bottom intakeHigher-wattage GPUs dump far more heat into the chassisRadiator flexibilityOne usable mountMultiple top/side/front optionsPrevents future cooling upgrades from stealing GPU spacePSU areaFits current PSU tightlyRoom for longer PSU and cable bendsHigh-end GPU upgrades may require larger ATX 3.x unitsMotherboard supportOne form factorATX plus M-ATX/ITX; E-ATX where relevantExtends the chassis beyond one motherboard generationCable chamberMinimal routing depthGenerous rear routing spaceThick power cables and hubs need physical volumeExpansion-slot spaceGPU barely clears slotsAdditional usable slot spaceHelps thick GPUs, capture cards and vertical mountsService accessMajor teardown for upgradesRemovable panels and accessible filtersFuture upgrades should not require rebuilding the entire PC

Notice what is missing?

RGB.

I have nothing against RGB. But RGB should rank somewhere below “Will my next $1,000+ GPU actually fit?”



GPU Thickness Is Becoming as Important as GPU Length

Length gets the headlines.

Thickness causes the ugly surprises.

A 350 mm graphics card inside a 400 mm case sounds comfortable until a 3.5-slot or 4-slot cooler occupies the lower half of the motherboard, approaches bottom-mounted intake fans, blocks expansion cards, and eliminates the space where an anti-sag bracket was supposed to sit.

The MSI RTX 5090 Gaming Trio OC's 70 mm thickness and 2.119 kg card weight show why this deserves serious attention.

Two kilograms.

That is not a decorative PCIe card anymore. Mechanically, we are hanging a substantial object from the motherboard area.

So I want a case that provides room for a GPU support bracket or support pillar without forcing me to remove the fans that were supposed to cool the GPU.

Do Not Ignore GPU Width and the Power Cable

This is the second trap.

A PC case can have outstanding GPU length clearance and still fail because the graphics card is too wide once its power cable is attached.

NVIDIA explicitly instructs RTX 5090 Founders Edition builders to plan about 36 mm of additional space for power cables beyond the card's installation envelope.

That should change how people evaluate panoramic glass cases.

If your GPU sits close to the side panel, the relevant question is not:

“Does the panel close?”

It is:

“Does the panel close without forcing the GPU cable into an unnecessarily aggressive bend?”

Those are not the same thing.

A High-Wattage GPU Turns Your PC Case Into a Thermal System

A case is not storage.

It is airflow hardware.

The RTX 5090's official 575 W Total Graphics Power specification is an extreme example, but it demonstrates the direction of high-end hardware: a future case must be evaluated partly by how much heat it can evacuate, not merely by what dimensions it accepts.

ACEGEEK's guide to choosing a PC case based on GPU power draw makes exactly this distinction, examining case selection around 355 W, 450 W and 575 W-class GPU loads rather than treating every graphics card as the same cooling problem.

I agree with the premise.

Strongly.

A 180 W graphics card can tolerate airflow compromises that become embarrassing once the GPU is converting hundreds of watts of electricity into heat inside the chassis.

I Want a Direct Intake Path

For a future GPU upgrade, I prefer a case with at least one intake route that feeds cool room air toward the graphics card:





Front mesh intake



Large side intake



Bottom intake beneath the GPU



A combination of side and bottom intake in panoramic layouts

Glass is not automatically bad.

Bad airflow is bad.

A panoramic PC case with intelligently positioned bottom and side fans can cool a large GPU perfectly well, while a traditional-looking chassis with a blocked front panel can perform poorly.

So I judge the path, not the material.

Radiator Support Can Quietly Destroy GPU Compatibility

“Supports 360 mm radiator.”

Fine.

Where?

That one question can completely alter the future-proof value of a PC case.

Put a thick radiator and 25 mm fans at the front of some chassis and your advertised GPU clearance shrinks.

Move the radiator to the roof and another problem appears: RAM, motherboard heatsinks, EPS cables, and tube fittings begin fighting for the same space.

ACEGEEK's guide explaining why top-mounted radiators can interfere with RAM highlights this three-dimensional conflict. A case can technically support a radiator's length while still creating problems with DIMM height or motherboard components underneath it.

That is why my preferred upgrade path looks like this:

Best Scenario

Top radiator with enough motherboard offset, plus unobstructed front/side/bottom GPU intake.

Acceptable Scenario

Side-mounted radiator that does not substantially restrict GPU intake or consume card clearance.

Riskier Scenario

Front-mounted radiator positioned directly in the GPU's maximum-length envelope.

None of these configurations is automatically right or wrong.

But a future-proof PC case gives you choices.

A weak case gives you one configuration and hopes your next components cooperate.

Motherboard Compatibility Has Started to Matter More

There is another reason I would not buy a case solely around today's GPU.

Motherboard layouts are changing too.

Rear-connector ecosystems such as ASUS BTF and MSI Project Zero move many traditional motherboard connectors behind the board, which requires chassis cutouts and cable space in places older cases were never designed to accommodate.

ACEGEEK's Back-Connect PC Case Buying Guide covers that distinction directly: a chassis supporting standard ATX dimensions does not automatically mean it supports a rear-connector motherboard.

Would I refuse to buy a conventional case because it lacks back-connect support?

No.

But if two similarly priced cases meet my airflow and GPU-clearance requirements, and one supports both standard and back-connect layouts, I consider that real PC case upgradeability.

That capability may actually matter later.

Decorative RGB presets probably won't.

The Best PC Case for a GPU Upgrade Is Not Necessarily the Largest

This is where future-proofing gets misunderstood.

Bigger can help.

Bigger is not automatically better.

A huge full tower may provide massive GPU clearance yet still offer an inefficient airflow path, awkward fan placement, unnecessary desk footprint, and acres of unused space.

For most mainstream and enthusiast builders, I still see a well-designed ATX mid tower as the rational center of the market.

ACEGEEK's current buying guidance reaches a similar conclusion: ATX mid towers generally provide enough room for full-sized GPUs, normal ATX motherboards, common liquid-cooling configurations, storage, and cable management without automatically forcing buyers into full-tower dimensions.

The important word is well-designed.

A 45-liter chassis with intelligent geometry can be more useful than a 60-liter box whose internal brackets collide with everything.

My Buying Rules for a PC Case I Expect to Keep Through Multiple GPUs

If I were choosing a case specifically around a future GPU upgrade, I would prioritize these factors in this order:





Real GPU clearance

I want substantial length margin after accounting for cooling hardware.



GPU width and cable clearance

I check the complete installation envelope, not just PCB dimensions.



GPU thickness

The case should remain workable with very thick multi-slot coolers.



Direct GPU airflow

Front, side, or bottom fans should deliver fresh air to the graphics card.



Flexible radiator placement

A CPU cooling upgrade should not automatically cancel a GPU upgrade.



PSU and cable-management space

High-power GPU generations may push users toward larger ATX 3.x power supplies and heavier cables.



Useful motherboard support

Standard ATX support is obvious; back-connect compatibility is a meaningful bonus for long service life.



Accessible panels and filters

A case kept for multiple generations will be opened and cleaned repeatedly.



Front I/O worth keeping

USB-C and a sensible front-panel layout matter more over five years than another strip of lighting.



Only then, aesthetics

I want the machine to look good too. I just refuse to let appearance decide whether the next GPU fits.

What “Future-Proof” Really Means in 2026

Nobody can guarantee that a PC case purchased in 2026 will support every graphics card released in 2029.

Anyone making that promise is selling certainty they do not possess.

Future-proofing means buying margin.

More GPU clearance than you currently need.

More cable room than your current card requires.

More airflow than today's GPU demands.

More radiator flexibility than your current cooler uses.

More motherboard compatibility than your existing board requires.

That is rational future-proofing.

And the RTX 5090 generation gives us a useful warning. One Founders Edition design can be 304 mm long while an AIB model using the same GPU reaches 359 mm and 70 mm thick.

Tomorrow's hardware will make its own choices.

Your chassis needs enough flexibility to survive them.

FAQs

What is a future-proof PC case?

A future-proof PC case is a chassis designed with enough physical clearance, cooling capacity, cable space, motherboard compatibility, radiator flexibility, and expansion room to accept hardware upgrades beyond the components installed today, reducing the chance that a future GPU, cooler, power supply, or motherboard forces the owner to replace the entire case.

For GPU-focused builds, I would pay particular attention to usable graphics-card length, card thickness, side-panel cable space, intake airflow, radiator position, and PSU compartment size.

How much GPU clearance should a future-proof PC case have?

A future-proof PC case should ideally provide substantially more GPU clearance than the graphics card you currently own, with roughly 380–400 mm or more being a sensible high-end planning target when chassis size allows, because future partner cards, radiators, fans, brackets, power cables, and support hardware can reduce the published usable space.

That is a planning target rather than an industry guarantee. A smaller case can still be upgradeable if its internal geometry is efficient and the future GPU is compact.

How do I know if my next GPU will fit in my PC case?

To determine whether a new GPU will fit your PC case, compare the exact card's length, width, thickness, slot requirement, power-connector position, and cable-bend space against the chassis dimensions while also subtracting any room occupied by front radiators, fans, drive cages, support brackets, vertical mounts, or other installed hardware.

Never rely only on the case's “maximum GPU length” figure. Check the exact graphics-card model, since Founders Edition and partner cards can have dramatically different cooler dimensions. NVIDIA itself notes that add-in-card dimensions vary by manufacturer.

Is GPU clearance more important than PC case size?

GPU clearance is more useful than external PC case size when predicting graphics-card compatibility because a physically large chassis can still contain internal brackets, radiators, fans, cable structures, or drive cages that restrict the card, while a smaller but efficiently designed chassis may provide substantially more usable GPU length and thickness clearance.

Think in internal geometry, not liters.

The GPU does not care how impressive the external dimensions look on the specification sheet.

Is a bigger PC case always better for future GPU upgrades?

A bigger PC case is not automatically better for future GPU upgrades because overall chassis size does not guarantee efficient airflow, useful GPU clearance, cable space, radiator flexibility, or sensible fan placement; the better choice is a case that combines adequate physical margin with a direct cooling path and an interior layout that remains usable after components change.

For many gaming systems, that can still mean a carefully designed ATX mid tower rather than a full tower.

Should I buy a new PC case before upgrading my GPU?

You should buy a new PC case before a GPU upgrade only when your existing chassis cannot provide sufficient card length, thickness, power-cable clearance, airflow, PSU compatibility, or cooling space for the intended graphics card, since replacing an otherwise adequate case provides little performance benefit merely for the sake of calling the build future-proof.

Measure first.

If your current chassis already offers comfortable clearance and strong airflow, keep it. A case that survives another GPU generation is doing exactly what a good PC case should do.

What is the best future-proof PC case for a GPU upgrade?

The best future-proof PC case for a GPU upgrade is a well-ventilated chassis with generous graphics-card length and thickness clearance, sufficient side-panel space for modern power connectors, multiple cooling configurations, adequate PSU and cable-management room, accessible expansion slots, and motherboard support broad enough to accommodate likely upgrades without compromising airflow or serviceability.

I would compare those measurements before comparing brands.

Start with the hardware envelope you expect to need, then use resources such as ACEGEEK's PC case compatibility guide to eliminate chassis that depend on zero-margin fitment.

Your Next GPU Upgrade Starts With a Tape Measure

Before ordering your next PC case, write down six numbers from your current build and target GPU:

GPU length. GPU width. GPU thickness. Power-cable clearance. Radiator thickness. PSU length.

Then compare those numbers against the chassis in the configuration you will actually use—not the empty configuration shown in the marketing photograph.

If you expect to move to a larger triple-fan card, start with ACEGEEK's guide to PC cases for large GPUs, then compare the thermal requirements using the GPU power draw case-selection guide.

Buy room.

Buy airflow.

Buy options.

Your next GPU may be expensive enough already. Do not let the wrong chassis turn it into a full-system rebuild.

Learn how to choose a future-proof PC case for your next GPU upgrade by checking GPU clearance, card thickness, power-cable space, airflow, radiator conflicts, motherboard support, and real upgrade headroom.

Будущие тенденции

Узнайте, как выбрать перспективный корпус для ПК для следующего обновления видеокарты, проверив зазоры между видеокартой и платой, толщину карты, пространство для кабелей питания, вентиляцию, конфликты с радиаторами, поддержку материнских плат и реальные возможности для апгрейда.

Как выбрать корпус для ПК, который будет актуален в будущем, для следующего обновления видеокарты

Acegeek предлагает высококачественные компьютерные корпуса, системы охлаждения, блоки питания и периферийные устройства. Посетите наш сайт, чтобы ознакомиться с первоклассными товарами и аксессуарами.

ACEGEEK | Купить высококачественные компьютерные корпуса и аксессуары

Acegeek offers high-quality computer cases, cooling solutions, power supplies, and peripherals. Explore our website for top-notch products & accessories.

Блог

Просмотр сейчас：Future-Proof PC Case