Reviews                                                         

420mm AIO Case Buying Guide: Size, Fans, and Top Clearance

And four words that have probably caused more unnecessary case returns than most PC builders would admit, because a 420mm mounting label tells us only that the chassis was designed around three 140mm fan positions—it does not tell us whether a 458mm-long radiator, thick fan stack, tall DDR5 modules, oversized VRM heatsinks, EPS cable, rear exhaust fan, and radiator end tanks can all occupy the same space.

So what are we actually buying when we search for a 

That distinction matters because current 420mm coolers are not physically identical. Corsair's iCUE LINK TITAN 420 RX RGB uses a radiator measuring 

, while ARCTIC's Liquid Freezer III Pro 420 uses a substantially thicker 

 radiator and explicitly states that the cooler requires at least 

Corsair publishes the TITAN 420 specifications here

ARCTIC provides its Liquid Freezer III Pro 420 dimensions here

One millimeter here. Eleven millimeters there.

That is how “compatible” becomes “remove the motherboard and start again.”

That sounds obvious, but it creates two dimensions builders routinely underestimate: width and total physical length.

A 360mm radiator uses three 120mm-class fans. A 420mm radiator uses three 140mm-class fans. If we compare only the nominal square face area occupied by the three fan frames:

 mean a 420mm AIO automatically cools 36.1% better than a 360mm model. Pump design, cold plate, fin density, fan pressure, coolant flow, CPU heat density, fan RPM and case restriction still decide actual thermal performance.

And the radiator itself extends beyond the 420mm occupied by the three fan frames. Corsair's current TITAN example reaches 457mm. ARCTIC reaches 458mm. Add end tanks, tube exits and mounting tolerance, and a case with exactly 420mm of empty-looking roof space is nowhere near enough.

 as a three-dimensional measurement exercise rather than a checkbox.

420mm Radiator Case Dimensions That Actually Matter

MeasurementReal ExampleWhy It MattersRadiator class420mmTells us the fan mounting familyActual radiator length457–458mm in Corsair/ARCTIC examplesDetermines whether end tanks physically fitRadiator width138–140mmDetermines motherboard and side-panel overlapRadiator thickness27mm Corsair / 38mm ARCTICChanges total roof stack depthFan thickness25mm Corsair exampleAdds directly to vertical clearance requirementComplete cooling stack~52mm conventional / ≥63mm ARCTIC Pro requirementDetermines RAM, VRM and EPS collision riskTop fan supportIdeally 3 × 140mmConfirms mounting patternRadiator mounting positionOffset or directly above motherboardDetermines whether RAM sits under the fans

Corsair's 27mm radiator paired with 25mm fans creates roughly a 

. ARCTIC's thicker design is a different physical problem altogether; the company tells buyers to allow at least 63mm of clearance.

That is exactly why “best PC case for 420mm radiator” lists become dangerous when they simply copy a manufacturer's radiator-support field.

The Top-Clearance Trap Nobody Should Ignore

A 420mm radiator is built around 140mm-class fans, which means the assembly extends farther toward the motherboard than a 120mm-based radiator if the top rails are not strongly offset toward the side panel.

why top-mounted radiators can interfere with RAM

 explains the collision zone in detail: radiator thickness, fan thickness, DIMM height, VRM heatsinks and roof-mount offset all interact.

For a 420mm build, I would pay even more attention because we are moving from a 120mm-wide fan family to 140mm hardware.

A Real Manufacturer Example: Fractal's 36mm Restriction

Fractal Design provides one of the better demonstrations of why specifications need context.

Its Meshify 2 officially accepts 140mm-based top radiators, including 

, but Fractal also states that these configurations impose a 

36mm maximum motherboard-component height

That restriction applies particularly to RAM, large VRM heatsinks and rear-I/O structures.

Fractal says an ARCTIC Liquid Freezer II 420 can fit the roof, but the builder may need to remove the rear fan or replace it with a 120mm model, while also keeping the front-most top fan area free.

That is not theoretical internet arguing. It is the case manufacturer describing the compromises itself in its 

official Meshify 2 compatibility guidance

This is why I dislike treating the phrase 

 as if it described universal compatibility.

How to Check 420mm Radiator Clearance Before Buying

Here is the method I would use before spending money.

For example, two current 420mm products already show why this matters.

ARCTIC's Liquid Freezer III Pro 420 measures 

That 11mm thickness difference is substantial once the radiator hangs over a motherboard.

A proper top-mounted 420 configuration generally requires three consecutive 140mm mounting positions.

A case supporting “3 × 120mm top fans” is a 360mm-class roof.

That does not magically become a 420mm roof because the chassis looks large.

 is a useful example of what I want to see in a specification sheet: its top supports 

, while the radiator specification explicitly lists 

. The case itself measures 483 × 238 × 490mm and lists 400mm maximum GPU clearance.

Suppose your radiator is 27mm thick and the fans are 25mm thick.

Now compare that depth against the available space above the motherboard.

Zero-millimeter clearance is not clever engineering.

For deeper measurement methodology, ACEGEEK's 

top-radiator clearance guide for RAM, tubes, and motherboard space

 is worth checking before finalizing the motherboard and memory combination.

A 420mm radiator may be roughly 138–140mm wide. Its fans are 140mm wide.

If the mounting holes sit almost directly above the DIMM sockets, that wide cooling assembly can hang into the RAM zone even when the case has ample vertical height.

An offset roof rail is therefore valuable.

The farther the radiator can sit toward the side panel—and away from the motherboard—the less likely it is to collide with tall RAM or VRM hardware.

5. Check the Front and Rear End-Tank Zones

Three 140mm fans consume 420mm of nominal mounting length.

This is why I want a real radiator-length specification instead of “420 supported.”

420mm AIO Fans: Three 140mm Fans Change the Airflow Plan

Its fans change the acoustic and pressure strategy.

Three 140mm fans can move substantial air at lower rotational speeds when the fan and radiator are designed well, but a radiator remains an airflow restriction. You still need fans capable of maintaining pressure through the fin stack.

Learn how to choose a 420mm AIO case by checking radiator size, 3×140mm fan support, top clearance, RAM space, airflow, and GPU compatibility.

Avaliações

Aprenda a escolher uma caixa AIO de 420 mm verificando o tamanho do radiador, o suporte para 3 ventoinhas de 140 mm, a altura livre na parte superior, o espaço para RAM, o fluxo de ar e a compatibilidade com a placa gráfica.

Guia de compra de caixas AIO de 420 mm: tamanho, ventoinhas e espaço na parte superior.

A Acegeek oferece caixas para computadores, soluções de refrigeração, fontes de alimentação e periféricos de alta qualidade. Explore o nosso site para encontrar produtos e acessórios de primeira qualidade.

ACEGEEK | Compre Caixas e Acessórios para Computador de Alta Qualidade

Acegeek offers high-quality computer cases, cooling solutions, power supplies, and peripherals. Explore our website for top-notch products & accessories.

Blog

A visualizar：PC Case Radiator Support