Reviews                                                         

Mini-ITX Case Compatibility Checklist for High-Power Builds

A high-power Mini-ITX build compresses the GPU, CPU cooler, PSU, motherboard, storage, cables, fans, radiator, memory, and their combined heat output into a space where moving one component 10 or 15 millimeters can determine whether another component fits at all.

So why do buyers still start with case volume?

, I treat the manufacturer's motherboard-support line as the beginning of the investigation, not the conclusion. “Supports Mini-ITX” tells me that a 170 mm-class motherboard mounting pattern belongs there. It says almost nothing about the graphics card, power cable, radiator, pump block, SFX power supply, RAM, or airflow configuration that will surround it.

That distinction matters more now because desktop hardware has become remarkably power-dense.

 list the Founders Edition at 304 mm long, 137 mm wide, two slots and 

. NVIDIA also warns that add-in-board dimensions vary by manufacturer.

16 cores, 32 threads, up to 5.7 GHz and a 170 W default TDP

Put hardware in that class into a genuinely compact chassis and the question changes.

“Does this Mini-ITX PC case support my motherboard?”

“Can every component occupy its required three-dimensional space, receive enough electrical power, reject enough heat, and still be removed later without dismantling the entire computer?”

Mini-ITX Case Compatibility Starts With Geometry, Not Liters

The first number shoppers usually quote is case volume.

Interesting number. Poor compatibility test.

Two cases with similar external volume can use completely different internal layouts. One might place the PSU beside the motherboard. Another may sandwich the GPU behind it with a PCIe riser. Another may move the power supply toward the front and reserve the roof for a radiator.

whether small cases can fit high-end GPUs

 reaches the same practical conclusion: GPU length alone does not determine whether a high-end graphics card works inside a compact chassis. Slot thickness, cable space, intake access, PSU capacity and exhaust routing all matter.

A Mini-ITX case must support the Mini-ITX motherboard mounting layout, but then inspect what surrounds the motherboard:

I have seen compatibility logic reduced to “the motherboard fits, therefore the build fits.” That is lazy reasoning. A header located under a radiator, behind the GPU or against the PSU may technically exist while becoming practically unusable.

This is probably the biggest Mini-ITX case buying mistake.

A graphics card has at least four dimensions that matter:

A 304 mm GPU fitting into a case rated for 305 mm does not give you one millimeter of useful engineering margin. It gives you a puzzle.

guide to choosing a PC case for large triple-fan GPUs

 makes an important distinction between published GPU clearance and the room left after fans, radiators, cables and airflow requirements are considered.

I would apply an even harsher rule to a high-power Mini-ITX case.

If your card is 304 mm long, I would rather see meaningful spare space than a chassis specification of 305 mm. You may need room to angle the card during installation. A front fan may occupy part of the published clearance. The card's end plate may extend beyond the PCB. And future removal should not require stripping the case back to bare steel.

The High-Power Mini-ITX Compatibility Table

Here is the checklist I would actually use before ordering parts.

Compatibility AreaWhat to MeasurePractical TargetRed FlagMotherboardExact supported form factorExplicit Mini-ITX support“Compact motherboard support” without dimensionsGPU lengthPhysical card lengthMeaningful margin beyond GPU lengthCard equals case maximumGPU thicknessSlots or millimetersSpace for cooler plus intake gapGPU pressed against solid panelGPU widthPCIe edge to outer cooler edgeRoom for power connector and side panelConnector touches panelGPU power cableConnector + bend/routing zoneNatural bend without panel pressureCable sharply folded at connectorPSUSFX or SFX-L dimensionsExact PSU format confirmedAssuming SFX-L fits because SFX doesPSU wattageGPU + CPU + system demandFollow GPU/PSU guidance with headroomBuying by wattage aloneCPU coolingCooler height or radiator envelopeVerified against board, RAM and PSUChecking radiator length onlyRAMDIMM heightClear of radiator/fans/tubesTall RAM directly below radiatorIntakeOpen area near GPUDirect access to cool outside airGPU fans face solid panelExhaustHeat escape pathDefined top/rear/side exhaustMultiple intakes with no exitStorageM.2/2.5-inch installation positionAccessible after assemblyDrive hidden behind PSU/GPUCable routing24-pin, EPS, GPU, SATA, front I/ORouting path planned before assemblyCables share fan-blade spaceService accessGPU/PSU/cooler removal sequenceMajor parts independently removableFull teardown for minor service

That last line receives almost no attention.

A compact PC that benchmarks beautifully but requires radiator removal just to access the motherboard battery is not elegant engineering. It is mechanical debt.

Mini-ITX GPU Clearance Is Now a Power-Cable Problem Too

The GPU can physically fit and the side panel can still refuse to close safely.

Intel's desktop power-supply design documentation describes the 

12V-2x6 auxiliary connector as capable of delivering up to 600 W of 12 V power to a PCIe add-in card

. The connector also incorporates sense contacts used for power capability and connection signaling.

That is serious current passing through one compact connection.

So I strongly dislike builds where the GPU's power cable exits the connector and immediately gets crushed against the side panel.

Measure Side-Panel Clearance After the Connector

motherboard/GPU position → GPU body → connector → cable routing → side panel

The connector itself may fit while the cable does not.

And this is exactly why a wider case can sometimes be more useful than a longer one.

For a deeper discussion of upgrading around graphics-card dimensions rather than marketing labels, see ACEGEEK's 

future-proof PC case guide for GPU upgrades

. It separates GPU length, thickness, cable space and cooling rather than pretending one clearance number solves everything.

I am not suggesting every Mini-ITX gaming PC needs an RTX 5090.

But it makes an excellent compatibility stress test.

NVIDIA lists its RTX 5090 Founders Edition at:

The same official page notes that board-partner designs can differ.

Those are completely different questions.

An NVIDIA Founders Edition dimension does not certify an ASUS, MSI, Gigabyte, Zotac, PNY or another manufacturer's card.

Mini-ITX PSU Compatibility: SFX and SFX-L Are Not the Same Thing

Buyers see “small-form-factor PSU” and stop reading.

SFX and SFX-L consume different amounts of internal length.

. That is a 30 mm length difference inside a case where 30 mm can destroy your cable-routing plan.

An SFX-L unit can intrude into GPU cabling, radiator tubing, storage brackets or the very cavity you planned to use for excess modular cable.

High Wattage No Longer Requires a Large ATX PSU

 in the 100 × 125 × 63.5 mm SFX format. Cooler Master's V SFX Platinum 1100 ATX 3.1 is also listed at 

So a high-power Mini-ITX build is no longer automatically blocked by PSU wattage density.

Higher power density means the thermal environment around the PSU matters more, not less.

A 1000 W sticker does not create cool air.

Mini-ITX case compatibility checklist for high-power builds: verify GPU clearance, SFX PSU fit, 12V-2x6 cable room, cooling, RAM, and airflow.

Ulasan

Daftar periksa kompatibilitas casing Mini-ITX untuk rakitan PC berkinerja tinggi: verifikasi ruang untuk GPU, kecocokan PSU SFX, ruang kabel 12V-2x6, pendinginan, RAM, dan aliran udara.

Daftar Periksa Kompatibilitas Casing Mini-ITX untuk Rakitan PC Bertenaga Tinggi

Acegeek menawarkan casing komputer, solusi pendinginan, catu daya, dan periferal berkualitas tinggi. Jelajahi situs web kami untuk produk & aksesori terbaik.

ACEGEEK | Beli Casing & Aksesoris Komputer Berkualitas Tinggi

Acegeek offers high-quality computer cases, cooling solutions, power supplies, and peripherals. Explore our website for top-notch products & accessories.

Blog

Sedang Dilihat：Mini-ITX Case