Reviews                                                         

What Is a P-Q Curve and Why Should Fan Buyers Care?

A fan advertised at 60 CFM may genuinely reach something close to that figure in a low-resistance test, yet once the same fan sits behind a radiator, dust filter, restrictive mesh panel, grille, or narrow glass-front intake, the airflow the computer actually receives can be dramatically lower.

So why are buyers still comparing fans by maximum CFM?

how much airflow does this fan deliver at the pressure my system will impose?

P means pressure. Q means volumetric airflow. Put them together and you get a graph showing how much air a fan can move as resistance increases.

For a buyer deciding between two 120 mm fans, choosing radiator fans, comparing static-pressure models, or trying to cool a restrictive gaming PC, the P-Q curve may tell you more than the headline airflow number ever will.

A Fan P-Q Curve Is the Specification Buyers Rarely See

, also called a fan performance curve or fan pressure airflow curve, plots the relationship between fan pressure and airflow at a defined operating speed.

The U.S. Department of Energy describes fan performance as a relationship between developed pressure, required power, and airflow, and specifically identifies understanding that relationship as central to fan selection. Its engineering sourcebook also shows why the useful answer is not simply the highest number printed on a box.

There are two endpoints buyers should understand.

, the fan is pushing against very high resistance. This is close to its maximum static-pressure condition.

, the fan is moving air freely. This is close to its maximum airflow or free-air condition.

A radiator is not zero resistance. Neither is a dust filter. Neither is perforated steel, dense mesh, a restrictive front panel, a CPU heatsink, nor a fan mounted several millimeters behind tempered glass.

 makes an important distinction: free-air CFM and maximum static pressure are opposite ends of the same performance relationship, not two independent trophies.

How to Read a Fan P-Q Curve Without Guessing

You do not need to be a fluid-dynamics engineer to read one.

But you do need to stop looking for one magic number.

For PC fans, manufacturers commonly publish airflow in 

. Larger numbers look attractive because larger numbers sell products.

Maximum CFM is typically associated with little external resistance. Your installed fan does not enjoy that luxury.

Put a fan behind a 360 mm radiator and the resistance changes.

Move the same fan behind a narrow side-slot intake and you have changed the operating system yet again.

North Carolina State University's engineering material explains the same underlying behavior: at a constant fan speed, pressure differential and volume flow are linked, and increasing the pressure requirement generally reduces the available flow.

NC State Extension — Fan Curves and Ventilation Engineering

Pressure tells us how much resistance the fan can work against.

PC fan manufacturers often express static pressure in 

, while engineering sources may use pascals or inches of water gauge.

A fan rated at 2.5 mmH₂O therefore has considerably more maximum pressure capability than a fan rated at 1.0 mmH₂O.

But here is where spec-sheet shopping goes wrong again.

Maximum pressure normally occurs near zero flow.

Those two maximum figures generally represent different ends of the curve.

This is the part buyers should care about.

The case, radiator, filter, grille, and every other obstruction together create a 

That point tells you approximately how much pressure and airflow the complete system settles at.

The University of Florida gives an unusually clear real-world example. In its published ventilation data, one fan produces 

. Same fan. Very different delivered airflow.

University of Florida IFAS — Fans for Greenhouses

Yes, that is a much larger ventilation fan than a 120 mm PC fan.

Maximum CFM vs Maximum Pressure vs the Real Operating Point

SpecificationWhat It Actually DescribesTypical ConditionBuyer RiskMaximum airflow / CFMHighest airflow potentialVery low restrictionMakes restrictive installations look better than they areMaximum static pressureHighest pressure capabilityNear-zero airflowDoes not tell you airflow at moderate resistanceP-Q curveAirflow available across different pressuresFull operating rangeMuch more useful for comparisonSystem resistance curveResistance imposed by radiator, filter, panel, grille, etc.Actual installationChanges when components or airflow paths changeFan operating pointIntersection of fan and system curvesReal working conditionBest indication of installed performanceRPMFan rotational speedDepends on PWM/DC controlHigher RPM can improve pressure and flow but usually raises noise

That operating point is where marketing meets physics.

The DOE fan sourcebook goes further. It shows that some fan/system combinations can enter unstable operating regions where interactions between the fan curve and system curve create cyclic behavior, reduced efficiency, added noise, and greater component wear.

A PC case fan is not an industrial blower, so I would not pretend the failure modes are identical.

But the buying lesson absolutely carries over: 

where a fan operates on its curve matters.

Why 60 CFM and 1.90 mmH₂O Still Do Not Tell the Whole Story

Take a current ACEGEEK product as a concrete example.

What if Fan A maintains 45 CFM around a moderate restriction while Fan B falls to 38 CFM?

Now Fan A is the better radiator fan despite losing the maximum-spec contest.

Perhaps Fan B's blade geometry holds considerably more flow as resistance rises. In that installation, its higher pressure capability becomes genuinely useful.

Without intermediate pressure-versus-flow data, buyers cannot know with much confidence.

This is why I consider a complete P-Q curve a sign of mature fan documentation. Maximum figures are sales-friendly. Curves are buyer-friendly.

The System Resistance Curve Is the Missing Half of Fan Selection

radiator fins, heatsink fins, dust filters, front-panel mesh, stamped fan grilles, narrow side vents, drive cages, decorative panels, badly positioned glass, cable obstruction, and even another restrictive airflow path downstream.

how front-panel design affects PC case cooling

 makes this point particularly well: two cases can both have three 120 mm intake fans while imposing completely different resistance because panel area, filter density, grille geometry, and intake clearance differ.

In many airflow systems, pressure loss rises roughly with the square of airflow. Double the flow and the pressure requirement can rise sharply rather than merely doubling.

The University of Florida describes the conventional ventilation system relationship as approximately parabolic, while Lawrence Berkeley National Laboratory notes that real system curves may also contain filter, coil, leakage, and other effects that make the model more complicated.

Mesh plus filter plus radiator is another.

What Is a P-Q Curve and Why Should Fan Buyers Care?

Numbers mislead buyers.

A fan advertised at 60 CFM may genuinely reach something close to that figure in a low-resistance test, yet once the same fan sits behind a radiator, dust filter, restrictive mesh panel, grille, or narrow glass-front intake, the airflow the computer actually receives can be dramatically lower.

So why are buyers still comparing fans by maximum CFM?

The better question is: how much airflow does this fan deliver at the pressure my system will impose?

That is exactly what a Fan P-Q Curve answers.

P means pressure. Q means volumetric airflow. Put them together and you get a graph showing how much air a fan can move as resistance increases.

That sounds like engineering paperwork.

It isn't.

For a buyer deciding between two 120 mm fans, choosing radiator fans, comparing static-pressure models, or trying to cool a restrictive gaming PC, the P-Q curve may tell you more than the headline airflow number ever will.

A Fan P-Q Curve Is the Specification Buyers Rarely See

A Fan P-Q Curve, also called a fan performance curve or fan pressure airflow curve, plots the relationship between fan pressure and airflow at a defined operating speed.

Usually:





Q, or airflow, sits on the horizontal X-axis and may be expressed in CFM or m³/h.



P, or pressure, sits on the vertical Y-axis and may be expressed in Pa, mmH₂O, or in. wg.



The curve normally moves from higher pressure at low airflow toward higher airflow at low pressure.

The U.S. Department of Energy describes fan performance as a relationship between developed pressure, required power, and airflow, and specifically identifies understanding that relationship as central to fan selection. Its engineering sourcebook also shows why the useful answer is not simply the highest number printed on a box.

There are two endpoints buyers should understand.

At zero or near-zero airflow, the fan is pushing against very high resistance. This is close to its maximum static-pressure condition.

At zero or near-zero static pressure, the fan is moving air freely. This is close to its maximum airflow or free-air condition.

Real PCs live between those endpoints.

That middle matters.

A radiator is not zero resistance. Neither is a dust filter. Neither is perforated steel, dense mesh, a restrictive front panel, a CPU heatsink, nor a fan mounted several millimeters behind tempered glass.

That is why ACEGEEK's guide to airflow fans versus static-pressure fans makes an important distinction: free-air CFM and maximum static pressure are opposite ends of the same performance relationship, not two independent trophies.

How to Read a Fan P-Q Curve Without Guessing

You do not need to be a fluid-dynamics engineer to read one.

But you do need to stop looking for one magic number.

Start With the Q Axis: Airflow

Q represents volume flow.

For PC fans, manufacturers commonly publish airflow in CFM—cubic feet per minute. Larger numbers look attractive because larger numbers sell products.

That is where trouble begins.

Maximum CFM is typically associated with little external resistance. Your installed fan does not enjoy that luxury.

Put a fan behind a 360 mm radiator and the resistance changes.

Add a filter and it changes again.

Move the same fan behind a narrow side-slot intake and you have changed the operating system yet again.

North Carolina State University's engineering material explains the same underlying behavior: at a constant fan speed, pressure differential and volume flow are linked, and increasing the pressure requirement generally reduces the available flow.

NC State Extension — Fan Curves and Ventilation Engineering

Then Read the P Axis: Pressure

Pressure tells us how much resistance the fan can work against.

PC fan manufacturers often express static pressure in mmH₂O, while engineering sources may use pascals or inches of water gauge.

A rough conversion is useful:

1 mmH₂O ≈ 9.81 Pa

A fan rated at 2.5 mmH₂O therefore has considerably more maximum pressure capability than a fan rated at 1.0 mmH₂O.

But here is where spec-sheet shopping goes wrong again.

Maximum pressure normally occurs near zero flow.

You cannot say:



Fan A has 3.0 mmH₂O, therefore it will push 3.0 mmH₂O while simultaneously delivering its advertised maximum CFM.

Those two maximum figures generally represent different ends of the curve.

The curve connects them.

Find the Fan Operating Point

This is the part buyers should care about.

A fan has its fan performance curve.

The case, radiator, filter, grille, and every other obstruction together create a system resistance curve.

Where those two curves intersect is the fan operating point.

That point tells you approximately how much pressure and airflow the complete system settles at.

The University of Florida gives an unusually clear real-world example. In its published ventilation data, one fan produces 10,200 CFM in free air, but only 9,200 CFM at 1/8-inch static pressure, 7,400 CFM at 1/4 inch, and 4,300 CFM at 3/8 inch. Same fan. Very different delivered airflow.

University of Florida IFAS — Fans for Greenhouses

Yes, that is a much larger ventilation fan than a 120 mm PC fan.

The scale changes.

The physics does not.



Maximum CFM vs Maximum Pressure vs the Real Operating Point

SpecificationWhat It Actually DescribesTypical ConditionBuyer RiskMaximum airflow / CFMHighest airflow potentialVery low restrictionMakes restrictive installations look better than they areMaximum static pressureHighest pressure capabilityNear-zero airflowDoes not tell you airflow at moderate resistanceP-Q curveAirflow available across different pressuresFull operating rangeMuch more useful for comparisonSystem resistance curveResistance imposed by radiator, filter, panel, grille, etc.Actual installationChanges when components or airflow paths changeFan operating pointIntersection of fan and system curvesReal working conditionBest indication of installed performanceRPMFan rotational speedDepends on PWM/DC controlHigher RPM can improve pressure and flow but usually raises noise

That operating point is where marketing meets physics.

And physics usually wins.

The DOE fan sourcebook goes further. It shows that some fan/system combinations can enter unstable operating regions where interactions between the fan curve and system curve create cyclic behavior, reduced efficiency, added noise, and greater component wear.

A PC case fan is not an industrial blower, so I would not pretend the failure modes are identical.

But the buying lesson absolutely carries over: where a fan operates on its curve matters.

Why 60 CFM and 1.90 mmH₂O Still Do Not Tell the Whole Story

Take a current ACEGEEK product as a concrete example.

The ACEGEEK Prime Fan product page lists:

120 × 120 × 25 mm dimensions, an 800–1,850 RPM ±10% speed range, 60 CFM ±10% air volume, 1.90 mmH₂O ±10% air pressure, 17.8–32.3 dBA ±10% noise, and a listed 30,000-hour service life.

Those figures are useful.

They are not a complete Fan P-Q Curve.

Suppose another 120 mm fan advertises:

65 CFM.

2.2 mmH₂O.

Looks better, right?

Maybe.

What if Fan A maintains 45 CFM around a moderate restriction while Fan B falls to 38 CFM?

Now Fan A is the better radiator fan despite losing the maximum-spec contest.

Or reverse it.

Perhaps Fan B's blade geometry holds considerably more flow as resistance rises. In that installation, its higher pressure capability becomes genuinely useful.

Without intermediate pressure-versus-flow data, buyers cannot know with much confidence.

This is why I consider a complete P-Q curve a sign of mature fan documentation. Maximum figures are sales-friendly. Curves are buyer-friendly.

There is a difference.

The System Resistance Curve Is the Missing Half of Fan Selection

Fans do not operate alone.

Your system pushes back.

In a PC, resistance can come from:

radiator fins, heatsink fins, dust filters, front-panel mesh, stamped fan grilles, narrow side vents, drive cages, decorative panels, badly positioned glass, cable obstruction, and even another restrictive airflow path downstream.

ACEGEEK's analysis of how front-panel design affects PC case cooling makes this point particularly well: two cases can both have three 120 mm intake fans while imposing completely different resistance because panel area, filter density, grille geometry, and intake clearance differ.

This is where the system resistance curve enters.

In many airflow systems, pressure loss rises roughly with the square of airflow. Double the flow and the pressure requirement can rise sharply rather than merely doubling.

The University of Florida describes the conventional ventilation system relationship as approximately parabolic, while Lawrence Berkeley National Laboratory notes that real system curves may also contain filter, coil, leakage, and other effects that make the model more complicated.

That distinction matters for a PC buyer.

A clean mesh front is one system.

Mesh plus a fine dust filter is another.

Mesh plus filter plus radiator is another.

A clogged filter is another again.

Same fan.

Different operating point.

Static Pressure vs Airflow Is Really a Curve Question

I dislike the way fan marketing has turned static pressure vs airflow into two separate product tribes.

“Airflow fan.”

“Pressure fan.”

Problem solved.

Not really.

A useful fan must produce both pressure and airflow. What changes is how well it maintains airflow as resistance increases.

For an open rear exhaust, I care more about strong airflow and acoustic behavior at the RPM range I expect to use.

For a radiator, restrictive intake, or dense filter, I want to know what happens farther up the pressure portion of the curve.

That is why ACEGEEK's guide to identifying radiator fans versus case airflow fans is a sensible next read: it connects CFM, static pressure, RPM, PWM control, obstruction, and real mounting position instead of pretending one headline number decides everything.

Want the best fan for high static pressure?

Do not automatically buy the model with the largest mmH₂O figure.

Ask for the curve.

Then identify the expected restriction.

Then compare airflow at that region.

That is a much harder purchasing process. It is also a much better one.

RPM Moves the Entire Fan Performance Curve

Fan speed changes the equation.

Under the conventional fan affinity laws, and assuming comparable geometry and operating conditions:

Airflow changes roughly with RPM.

Pressure changes roughly with RPM².

Power changes roughly with RPM³.

The DOE sourcebook explicitly presents those relationships as part of fan-selection engineering.

That explains why increasing fan speed can recover performance against restriction.

It also explains why brute force is a lousy default strategy.

Higher RPM usually brings more aerodynamic noise, motor noise, bearing noise, turbulence, and power demand.

So the best setup is rarely:

Run everything at maximum RPM.

I would rather see a fan produce adequate airflow around 800–1,300 RPM than require 1,800–2,500 RPM just to overcome an unnecessarily restrictive intake.

That is also why case design belongs in the fan-buying conversation. ACEGEEK's high-airflow PC build guide correctly treats fan performance and chassis restriction as one system rather than two shopping categories.

Why Test Conditions Matter More Than Marketing Copy

There is a broader industry signal here.

The U.S. Department of Energy currently specifies uniform test procedures for covered fans and blowers under 10 CFR 431.174, and DOE states that regulated representations of fan energy efficiency and energy use must follow those procedures. DOE's current page also notes that, as of its latest update, no federal energy-conservation standard is presently in force for the covered fans and blowers category.

U.S. Department of Energy — Fans and Blowers

That regulation is not a PC-fan buying rule.

But the principle is relevant.

A performance number is only meaningful when you understand how it was measured.

Was airflow tested in free air?

What pressure existed?

At what RPM?

At what voltage?

At what air density?

Was a grille fitted?

How was noise measured?

At what distance?

You can print “70 CFM” in giant type.

That still does not tell me what happens behind a 27 mm radiator, restrictive filter, or narrow side intake.

What I Would Demand Before Comparing Two Fans

When I compare fan specifications, I would rank the information roughly like this:





Full P-Q curve at the relevant RPM, preferably with multiple RPM curves rather than only maximum speed.



Static pressure and airflow units clearly stated, including the test standard where available.



Noise data across several speeds, not just one minimum or maximum dBA value.



RPM range and PWM behavior, because the useful operating zone matters more than a heroic maximum.



Installation context, especially if the fan is being marketed for radiators, heatsinks, restrictive intake panels, or open case exhaust.



Repeatable independent testing, particularly for premium fans whose price is justified by claims of better pressure-to-noise performance.

Notice what is missing.

RGB count.

Infinity mirrors.

Lighting zones.

Those are product features. They are not fan-performance measurements.

I like good-looking hardware too. But if the fan is supposed to move heat, I want airflow data before decoration.

FAQs

What is a P-Q curve?

A P-Q curve is a fan performance graph showing how airflow quantity, represented by Q, changes as pressure, represented by P, changes at a specified fan speed; it lets buyers see the usable performance between maximum free-air airflow and maximum static pressure instead of judging a fan from two isolated endpoint specifications.

For PC cooling, that middle region is usually where the fan actually operates because radiators, filters, mesh panels, grilles, and heatsinks all create resistance.

How do you read a Fan P-Q Curve?

To read a Fan P-Q Curve, locate airflow on the horizontal axis and pressure on the vertical axis, then follow the fan's performance line to determine how much flow remains at a particular pressure; the actual fan operating point occurs where that fan curve intersects the system resistance curve.

Do not simply look for the highest CFM or highest mmH₂O value. Compare the part of the curve that matches your installation.

What is the difference between maximum airflow and maximum static pressure?

Maximum airflow is the greatest volume of air a fan can deliver under very low resistance, while maximum static pressure is the greatest pressure the fan can develop when airflow approaches zero; these values describe opposite ends of the Fan P-Q Curve and generally cannot occur simultaneously during normal operation.

That is why adding 70 CFM and 3 mmH₂O to the same marketing table does not describe one real operating condition.

What is a fan operating point?

A fan operating point is the pressure-and-airflow condition where the fan's P-Q performance curve intersects the resistance curve of the system, representing the approximate flow the installed fan can actually deliver through filters, radiators, mesh, ducts, grilles, heatsinks, or other restrictions rather than its unrestricted laboratory maximum.

Change the system resistance and you move that point, even when the fan itself has not changed.

Why does a radiator reduce fan airflow?

A radiator reduces fan airflow because its closely spaced fins, tubes, frame, and boundary layers create resistance that requires the fan to develop pressure before air can pass through; as required pressure rises, the fan typically moves to a lower-flow point on its P-Q curve compared with unrestricted free-air operation.

This is why radiator selection should consider the complete fan pressure airflow curve, not only maximum CFM.

Is a higher static-pressure fan always better?

A higher static-pressure fan is not automatically better because maximum pressure is measured near the low-flow end of its performance range, while real cooling depends on how much airflow the fan maintains at the system's actual resistance, together with RPM, acoustic behavior, blade design, frame sealing, efficiency, and control characteristics.

For an unrestricted rear exhaust, paying more for extreme pressure capability may produce little practical benefit.

What is the best fan for high static pressure?

The best fan for high static pressure is a model that maintains strong airflow at the pressure imposed by the intended radiator, heatsink, filter, or restrictive intake while remaining acceptable in noise and speed; the best choice therefore comes from comparing P-Q curves at realistic operating points rather than ranking maximum mmH₂O alone.

For radiator use, I would prioritize pressure retention through the middle of the curve, then compare acoustics at the RPM needed to reach the cooling target.

Why should fan buyers care about a system resistance curve?

A system resistance curve shows how much pressure a specific cooling path requires as airflow rises, allowing buyers to combine real case, filter, radiator, grille, or heatsink resistance with a fan's P-Q curve and identify the resulting operating point rather than assuming advertised free-air airflow will survive unchanged after installation.

That is the engineering reason two identical fans can deliver noticeably different cooling in two different PC cases.

Your Next Step: Buy the Curve, Not the Headline Number

Ask one question before your next fan purchase:

Where is the P-Q curve?

If the manufacturer provides it, compare the fan at the pressure your installation is likely to create.

If it does not, treat maximum CFM and maximum static pressure as useful clues—not a complete performance prediction.

Then look at the rest of the cooling path. Radiator. Filter. Mesh. Glass clearance. Grilles. Fan speed. Exhaust area.

Because the fan does not decide its airflow alone.

The system does.

For the practical PC side of that decision, continue with ACEGEEK's airflow versus static-pressure fan guide, then compare radiator and case-fan requirements and finally check how front-panel restriction changes cooling performance before you spend money on another fan pack.

Maximum CFM and maximum static pressure describe two opposite ends of fan performance. A P-Q curve shows what happens between them—and that middle ground is where radiators, filters, mesh panels, and real PC cooling actually operate.

Acegeek offers high-quality computer cases, cooling solutions, power supplies, and peripherals. Explore our website for top-notch products & accessories.

Blog

Currently Browsing：Fan Performance Curve