Reviews                                                         

GPU Clearance With a Front Radiator: The Measurement Buyers Miss

When I audit a PC case specification, I do not treat its advertised maximum GPU length as usable GPU clearance until I know exactly where that number starts, where it ends, whether the front fan bracket occupies the same physical zone, and what happens when a radiator, fans, tubes, screws, and the graphics card all arrive at the party together.

Why would I trust a clearance figure measured in an empty case?

 without promising that both specifications are simultaneously available. Those are two separate statements about an empty chassis.

Once a front radiator enters the calculation, the number buyers need is no longer maximum GPU clearance.

remaining GPU clearance after the radiator-and-fan stack is installed

And the difference can easily exceed 50 mm.

The GPU Clearance Number on the Spec Sheet Is Only the Starting Point

GPU clearance normally describes the longitudinal distance available for a graphics card from the rear PCIe mounting plane toward the front of the chassis.

A graphics card does not interact with a specification table. It interacts with steel brackets, fans, radiators, tubing, cables, filters, and whatever else occupies the same internal volume.

GPU and radiator clearance math for tight chassis designs

 makes the same distinction: GPU fit is a three-dimensional packaging problem rather than a single advertised length.

, however, I would make the calculation even simpler before looking at anything else:

Usable GPU clearance = advertised GPU clearance − front radiator thickness − front fan thickness − other intrusions

That equation catches an uncomfortable number of supposedly compatible builds.

If the manufacturer's 360 mm GPU figure was measured with that front mounting zone empty, your theoretical remaining length becomes:

I would not call that comfortable compatibility. I would call it a warning.

Real Hardware Shows Why Front Radiator GPU Clearance Gets Ugly Fast

This is not theoretical arithmetic built around imaginary parts.

. More importantly for case fitment, NVIDIA's own installation guidance says builders should plan for a 

36 mm of additional space for power cables

 before mounting details or any additional safety margin. 

And 52 mm is not even the thick end of the market.

. That makes the assembled radiator-and-fan depth approximately 

. ARCTIC explicitly compares its 38 mm radiator with conventional 27 mm designs.

ARCTIC Liquid Freezer III Pro 360 specifications

Not when your GPU had eight millimeters left.

What Front Radiator Installation Actually Does to GPU Clearance

Here is the comparison buyers should make.

Advertised GPU ClearanceRadiatorFanCooling StackTheoretical Remaining GPU Length420 mm27 mm25 mm52 mm368 mm400 mm27 mm25 mm52 mm348 mm360 mm27 mm25 mm52 mm308 mm350 mm27 mm25 mm52 mm298 mm360 mm38 mm25 mm63 mm297 mm340 mm38 mm25 mm63 mm277 mm

This table is deliberately harsh because it assumes the radiator-and-fan stack projects into the published GPU envelope.

A manufacturer may recess the fans toward the front panel, place the radiator outside the nominal GPU measurement zone, or calculate GPU clearance with certain front hardware already installed.

What I reject is the lazy assumption that 

“supports a 360 mm front radiator” + “supports a 360 mm GPU” automatically means both fit together

why radiator thickness breaks otherwise compatible builds

 answer completely different compatibility questions. A 360 mm label describes the radiator class; it does not tell you how many millimeters that assembly projects toward the graphics card.

A Real ACEGEEK Case Shows Why Configuration Matters

 as an example of how a buyer should read a case specification.

But if I were planning a 350 mm board-partner GPU and a front-mounted 360 mm AIO, I would still verify whether that 

410 mm maximum graphics card clearance applies with the front radiator installed

Because a generic 52 mm front cooling stack subtracted from 410 mm would produce 

A 63 mm stack would mathematically leave 

Now the 350 mm graphics card that looked absurdly safe against a 410 mm specification becomes questionable.

 mean the Puzzle necessarily loses exactly 52 or 63 mm—the chassis geometry must be measured in the intended configuration. It means the buyer has identified the right question before purchasing.

The Measurement Buyers Miss Is the Radiator's Installed Depth

how to measure GPU clearance with a front radiator

NVIDIA explicitly notes that card dimensions vary by add-in-board manufacturer. A Founders Edition specification cannot certify a different vendor's cooler design.

choosing a PC case for large triple-fan GPUs

 is worth using alongside this measurement because today's oversized graphics cards introduce thickness, cable and airflow requirements that a basic length check misses.

Step 2: Find the Case's Maximum GPU Clearance

under what configuration that figure was measured

If the manual does not say, I would not assume the most favorable scenario.

A “360 mm radiator” is not 360 mm thick.

That 360 mm designation refers to its three-120-mm-fan class, not its depth.

Now you are measuring physical hardware instead of marketing categories.

Step 5: Determine Which Parts Actually Intrude Into the GPU Zone

This is where the best compatibility checks stop being simple subtraction.

GPU Clearance With a Front Radiator: The Measurement Buyers Miss

Three millimeters matter.

When I audit a PC case specification, I do not treat its advertised maximum GPU length as usable GPU clearance until I know exactly where that number starts, where it ends, whether the front fan bracket occupies the same physical zone, and what happens when a radiator, fans, tubes, screws, and the graphics card all arrive at the party together.

Why would I trust a clearance figure measured in an empty case?

That is the mistake.

A case can advertise 360 mm GPU clearance and 360 mm front radiator support without promising that both specifications are simultaneously available. Those are two separate statements about an empty chassis.

Once a front radiator enters the calculation, the number buyers need is no longer maximum GPU clearance.

It is remaining GPU clearance after the radiator-and-fan stack is installed.

And the difference can easily exceed 50 mm.

The GPU Clearance Number on the Spec Sheet Is Only the Starting Point

GPU clearance normally describes the longitudinal distance available for a graphics card from the rear PCIe mounting plane toward the front of the chassis.

Useful number.

Incomplete number.

A graphics card does not interact with a specification table. It interacts with steel brackets, fans, radiators, tubing, cables, filters, and whatever else occupies the same internal volume.

ACEGEEK's broader guide to GPU and radiator clearance math for tight chassis designs makes the same distinction: GPU fit is a three-dimensional packaging problem rather than a single advertised length.

For a front-mounted radiator, however, I would make the calculation even simpler before looking at anything else:

Usable GPU clearance = advertised GPU clearance − front radiator thickness − front fan thickness − other intrusions

That equation catches an uncomfortable number of supposedly compatible builds.

Suppose the case advertises:





Maximum GPU clearance: 360 mm



Front radiator support: 360 mm



Radiator thickness: 27 mm



Fan thickness: 25 mm

The cooling stack is:

27 mm + 25 mm = 52 mm

If the manufacturer's 360 mm GPU figure was measured with that front mounting zone empty, your theoretical remaining length becomes:

360 mm − 52 mm = 308 mm

Now put a 304 mm GPU into that space.

Four millimeters remain.

I would not call that comfortable compatibility. I would call it a warning.

Real Hardware Shows Why Front Radiator GPU Clearance Gets Ugly Fast

This is not theoretical arithmetic built around imaginary parts.

NVIDIA currently lists the GeForce RTX 5090 Founders Edition at 304 mm long and 137 mm wide, with 575 W Total Graphics Power. More importantly for case fitment, NVIDIA's own installation guidance says builders should plan for a 304 × 137 × 61 mm card envelope and approximately 36 mm of additional space for power cables. NVIDIA's GeForce RTX 5090 specifications

That is my first reality check.

The second is the radiator.

Corsair specifies its iCUE LINK TITAN 360 RX RGB with a 396 × 120 × 27 mm radiator and three 25 mm-thick fans. That produces a nominal 52 mm radiator-and-fan stack before mounting details or any additional safety margin. Corsair TITAN 360 RX specifications

And 52 mm is not even the thick end of the market.

ARCTIC's Liquid Freezer III Pro 360 uses a 398 × 120 × 38 mm radiator, while its P12 Pro fans measure 25 mm thick. That makes the assembled radiator-and-fan depth approximately 63 mm. ARCTIC explicitly compares its 38 mm radiator with conventional 27 mm designs. ARCTIC Liquid Freezer III Pro 360 specifications ARCTIC P12 Pro fan specifications

Eleven extra millimeters.

Sounds trivial?

Not when your GPU had eight millimeters left.

What Front Radiator Installation Actually Does to GPU Clearance

Here is the comparison buyers should make.

Advertised GPU ClearanceRadiatorFanCooling StackTheoretical Remaining GPU Length420 mm27 mm25 mm52 mm368 mm400 mm27 mm25 mm52 mm348 mm360 mm27 mm25 mm52 mm308 mm350 mm27 mm25 mm52 mm298 mm360 mm38 mm25 mm63 mm297 mm340 mm38 mm25 mm63 mm277 mm

This table is deliberately harsh because it assumes the radiator-and-fan stack projects into the published GPU envelope.

Some cases do not.

A manufacturer may recess the fans toward the front panel, place the radiator outside the nominal GPU measurement zone, or calculate GPU clearance with certain front hardware already installed.

Good.

Then document it.

What I reject is the lazy assumption that “supports a 360 mm front radiator” + “supports a 360 mm GPU” automatically means both fit together.

They might.

They might not.

ACEGEEK's article on why radiator thickness breaks otherwise compatible builds is useful here because radiator length and radiator depth answer completely different compatibility questions. A 360 mm label describes the radiator class; it does not tell you how many millimeters that assembly projects toward the graphics card.

A Real ACEGEEK Case Shows Why Configuration Matters

Take the ACEGEEK Puzzle as an example of how a buyer should read a case specification.

The published specifications list:





410 mm maximum GPU clearance



360 mm front radiator support



360 mm top radiator support



Three front 120 mm or 140 mm fan positions



ATX, E-ATX, M-ATX, and ITX motherboard support

Those are useful numbers.

But if I were planning a 350 mm board-partner GPU and a front-mounted 360 mm AIO, I would still verify whether that 410 mm maximum graphics card clearance applies with the front radiator installed.

Why?

Because a generic 52 mm front cooling stack subtracted from 410 mm would produce 358 mm.

That is suddenly close.

A 63 mm stack would mathematically leave 347 mm.

Now the 350 mm graphics card that looked absurdly safe against a 410 mm specification becomes questionable.

This does not mean the Puzzle necessarily loses exactly 52 or 63 mm—the chassis geometry must be measured in the intended configuration. It means the buyer has identified the right question before purchasing.

That difference matters.



The Measurement Buyers Miss Is the Radiator's Installed Depth

Most people looking up how to measure GPU clearance with a front radiator start by finding GPU length.

That is only half the job.

Step 1: Get the Exact GPU Length

Do not search only by GPU family.

“RTX 5090 length” is not enough.

NVIDIA explicitly notes that card dimensions vary by add-in-board manufacturer. A Founders Edition specification cannot certify a different vendor's cooler design.

Find the exact SKU.

Record:





Full card length



Card width



Card thickness



Slot count



Power connector position



Power cable exit direction

ACEGEEK's guide to choosing a PC case for large triple-fan GPUs is worth using alongside this measurement because today's oversized graphics cards introduce thickness, cable and airflow requirements that a basic length check misses.

Step 2: Find the Case's Maximum GPU Clearance

Write down the manufacturer's number.

But put an asterisk next to it.

You need to know under what configuration that figure was measured.

Ask:





Front fans installed?



No front fans?



Radiator installed?



Drive cage installed?



Front bracket installed?



Reservoir installed?



Push or pull fan arrangement?

If the manual does not say, I would not assume the most favorable scenario.

Step 3: Measure Radiator Thickness

A “360 mm radiator” is not 360 mm thick.

That 360 mm designation refers to its three-120-mm-fan class, not its depth.

Actual radiator depth may be around:





27 mm



30 mm



38 mm



45 mm



or more

That variation can completely change front radiator GPU clearance.

Step 4: Add Fan Thickness

Standard fans are often around 25 mm thick.

Therefore:

27 mm radiator + 25 mm fans = 52 mm

38 mm radiator + 25 mm fans = 63 mm

Now you are measuring physical hardware instead of marketing categories.

Step 5: Determine Which Parts Actually Intrude Into the GPU Zone

This is where the best compatibility checks stop being simple subtraction.

Sometimes:





Fans sit between the chassis and front panel.



The radiator sits inside the main chamber.



Both radiator and fans sit inside.



A recessed mounting rail partially hides the fans.



A front bracket adds several millimeters.



Tube fittings extend toward the card.



A removable drive cage becomes the actual limit.

So I want a side-view drawing.

Not a glamour photo.

Measure from the PCIe expansion-slot mounting plane to the nearest obstruction at the height of the GPU nose.

That is your real PC case GPU clearance.

Do Not Confuse GPU Length Clearance With Power-Cable Clearance

There is another trap here.

A GPU can fit lengthwise and still fail the build.

NVIDIA's RTX 5090 installation guidance says to plan approximately 36 mm of additional space for power cables. That measurement primarily affects lateral space between the GPU connector region and the side panel rather than the longitudinal front-radiator calculation, but it proves why the phrase “my GPU fits” is dangerously vague.

You need at least three separate checks:

Length clearance: rear PCIe plane → front obstruction

Width clearance: motherboard/GPU → side panel

Thickness clearance: PCIe slots → nearby fans, bottom intake, or adjacent cards

Then add radiator geometry.

That is why I dislike compatibility calculators that return one green tick.

Mechanical packaging is not binary until every collision zone has been checked.

Front Radiator Placement Can Also Change GPU Cooling

There is another cost that does not appear in the millimeter calculation.

Air temperature.

A front radiator configured as intake pulls cool room air through the radiator first. The CPU cooler benefits, but some of that heat enters the case before reaching the graphics card.

A high-power GPU may therefore receive warmer intake air than it would with an unobstructed mesh front.

For a modest GPU, that trade may be irrelevant.

For something approaching the 575 W TGP class represented by NVIDIA's RTX 5090, I would at least think about it.

And this is where case architecture matters.

If your chassis offers strong bottom or side intake, those fans can feed the GPU without making it live entirely on radiator-heated air. ACEGEEK's guide to configuring side intake in a panoramic PC case discusses this exact airflow logic: give the GPU a direct path to outside air and provide a controlled top or rear exhaust route.

Front radiator placement is therefore not merely a fitment choice.

It is an airflow choice.

How Much Spare GPU Clearance Do I Actually Want?

I do not like zero-margin builds.

Yes, a 304 mm GPU can theoretically occupy a 305 mm cavity.

No, I would not design around it.

A small margin has to absorb:





Manufacturing tolerances



Screw heads



Fan frames



Bracket flex



GPU end-cap geometry



Tube positioning



Installation angle



Cable routing



Future servicing

I would prefer roughly 10–20 mm of usable longitudinal margin after the complete front cooling system is installed, especially with an expensive triple-fan graphics card.

That is a planning preference, not an industry standard.

But consider the alternative.

A 304 mm card inside 308 mm of theoretical remaining space gives you four millimeters.

Four.

If a bracket lip consumes 2 mm and the GPU's decorative cooler shell extends farther than the dimension you copied from a retailer, your spreadsheet was technically impressive right up until the side panel came off for the second time.

Front Radiator GPU Clearance: The Buying Checklist I Would Use

Before paying for the case, GPU, or AIO, I would write these numbers on one page:





Exact GPU length



Exact GPU width



Exact GPU thickness



Case maximum GPU clearance



Whether that clearance includes front fans



Radiator thickness



Fan thickness



Front mounting-bracket thickness or offset



Tube/fitting intrusion near the GPU



GPU power-cable clearance



Desired installation margin



Alternative top or side radiator location

Then calculate:

Advertised GPU clearance − actual front intrusion = remaining GPU clearance

Next:

Remaining GPU clearance − exact GPU length = installation margin

Example:

360 mm case clearance − 52 mm cooling stack = 308 mm

308 mm − 304 mm GPU = 4 mm margin

My verdict?

Too close for a build I want to assemble, clean, modify and eventually disassemble without swearing at it.

Now compare a 420 mm case:

420 − 52 = 368 mm

368 − 304 = 64 mm

Much healthier.

That is what useful GPU clearance math looks like.

FAQs

Does a front radiator reduce GPU clearance?

A front radiator can reduce GPU clearance whenever the radiator, its fans, or its mounting hardware project into the same longitudinal space reserved for the graphics card; therefore, the usable GPU length must be recalculated from the case's published maximum after accounting for the complete installed cooling stack and any nearby obstructions.

For example, a 27 mm radiator with 25 mm fans creates roughly 52 mm of cooling depth. If all 52 mm enters the GPU zone of a case rated for 360 mm, the theoretical remaining graphics card length falls to about 308 mm.

How do I calculate GPU clearance with a front radiator?

GPU clearance with a front radiator is calculated by subtracting the radiator's installed depth, fan thickness, mounting hardware and any additional front-side intrusion from the case's maximum GPU clearance, then subtracting the exact graphics-card length from that result to determine how much installation margin remains.

A practical formula is: case GPU clearance − front cooling intrusion − GPU length = remaining margin. Always confirm whether the manufacturer's original GPU specification already includes front fans or radiator hardware before subtracting anything.

Will a 360 mm GPU fit with a 360 mm front radiator?

A 360 mm graphics card will fit with a 360 mm front radiator only if the chassis provides enough simultaneous length and depth for both components; the shared “360 mm” label does not establish compatibility because radiator size describes its fan class while GPU clearance describes internal card length.

A normal 360 mm radiator may still be 27–38 mm thick and require 25 mm fans, creating a roughly 52–63 mm deep cooling assembly. Check the chassis drawing rather than matching two identical marketing numbers.

How much clearance should I leave between the GPU and front radiator?

A practical GPU-to-radiator margin is enough free space to accommodate installation tolerances, GPU end-cap geometry, radiator hardware, tube routing, airflow and future servicing; for ordinary full-size builds, I prefer roughly 10–20 mm of genuine remaining longitudinal space rather than designing the system to the manufacturer's absolute maximum.

That 10–20 mm figure is a planning preference, not a universal specification. More margin is useful with oversized partner cards, awkward installation angles, removable radiator brackets or hardware you expect to upgrade later.

Is GPU length the only measurement that matters for PC case compatibility?

GPU length is only one component of graphics-card compatibility because a successful installation also requires sufficient card width, slot thickness, power-connector space, airflow clearance, installation access and freedom from interference with radiators, fans, drive cages, brackets and other components occupying the chassis.

NVIDIA's own RTX 5090 guidance illustrates the point: beyond the card's physical dimensions, it recommends additional room for power cables and airflow. A card can therefore pass the length check while still failing the complete build.

Should I top-mount the radiator if a front radiator blocks my GPU?

A top-mounted radiator is often the cleaner alternative when a front radiator consumes too much GPU clearance, provided the radiator-and-fan stack clears the motherboard's VRM heatsinks, RAM, EPS power cable and other hardware near the top edge of the board.

Do not simply move one collision somewhere else. ACEGEEK's analysis of radiator thickness and compatibility conflicts shows why top mounting requires its own vertical-clearance calculation.

Measure the Installed Build Before You Buy the Parts

The measurement buyers miss is not GPU length.

It is what remains after the front radiator is installed.

So before buying your next PC case, stop comparing a GPU's length against the largest number in the specification table. Write down the exact radiator thickness. Add the fans. Check which side of the mounting bracket they occupy. Measure the resulting obstruction from the PCIe slot plane.

Then subtract.

If the remaining number leaves only a few millimeters around an expensive graphics card, change something now: choose a slimmer AIO, move the radiator to the top, select a shorter GPU, or choose a case with more usable GPU clearance.

Do the millimeter math before checkout.

It is considerably cheaper than discovering the answer with a screwdriver.

GPU clearance changes when a front radiator is installed. Learn how to subtract radiator and fan thickness, measure real GPU length clearance, and avoid expensive PC case compatibility mistakes.

How Much GPU Clearance Do You Really Need in a Modern PC Case?

The easy answer is to compare the graphics card length with the maximum GPU clearance printed on the PC case specification sheet.

Modern graphics cards have become long, tall, thick, power-hungry assemblies, and once front radiators, intake fans, 16-pin power cables, anti-sag brackets, vertical mounts, side panels, and airflow requirements enter the calculation, a case that supposedly supports a 360 mm GPU may become uncomfortable with a 350 mm card surprisingly fast.

So why are people still shopping as if GPU clearance were a single number?

, with a 575 W Total Graphics Power rating. NVIDIA also tells builders to provide room equivalent to a 

Same GPU generation. Same RTX 5090 badge.

That difference is exactly why I do not think "supports RTX 5090" is a serious PC case specification. Give me millimeters.

The Short Answer: Aim for More Than a Technical Fit

For most modern gaming PCs, I would treat the difference between the case's usable GPU length and the graphics card's actual length like this:

Remaining Length After Installing GPUMy AssessmentBest Use0–5 mmTechnically possible, practically poorOnly tightly controlled builds5–10 mmVery tightCompact builds with verified components10–20 mmAcceptableMainstream builds without front obstructions20–30 mmComfortableRecommended starting point30–50 mmVery comfortableHigh-end triple-fan GPUs50+ mmUpgrade-friendlyFlagship and future GPU planning

planning margins, not NVIDIA, AMD, PCI-SIG, or case-manufacturer standards

. They are deliberately conservative because the advertised GPU clearance number rarely tells the whole mechanical story.

Exact GPU length + 20–30 mm is a sensible minimum target for a normal high-performance build.

And if I am buying a chassis specifically to survive another flagship-GPU upgrade, I would rather have 

For a deeper look at oversized cards, ACEGEEK's 

guide to choosing a PC case for large triple-fan GPUs

 covers exactly why nominal fit and useful fit are different things.

GPU Length Clearance Is Only the First Measurement

Most product pages make GPU length the headline because length is easy to understand.

 check requires at least four measurements:

GPU length is measured from the rear mounting bracket toward the front of the card.

But partner models can change the calculation dramatically, as the 357.6 mm ROG Astral RTX 5090 demonstrates.

GPU size compatibility must be checked against the exact model number

, not merely "RTX 5080," "RTX 5090," or "RX 7900 XTX."

Width: Where the Side Panel Starts Fighting Back

This is the dimension I think buyers underestimate most often.

A card can easily clear the front of a case while creating problems at the side panel because the cooler, PCB, and power connector extend far outward from the motherboard.

NVIDIA's RTX 5090 guidance is especially useful here. The company specifies approximately 

36 mm of additional room for power cables

A 149.3 mm-wide partner card plus a stiff 16-pin connector is a very different installation problem from a 112 mm-wide mainstream graphics card using smaller connectors.

And forcing the cable against tempered glass is not my definition of compatible.

Thickness: A Four-Slot GPU Changes the Airflow Geometry

That matters for more than motherboard expansion-slot availability.

A thick graphics card moves the GPU fans closer to:

NVIDIA's own RTX 5090 case guidance recommends reserving clearance around the card equivalent to an unused expansion slot where possible to improve airflow.

A GPU cooler cannot move much air if its intake fans are breathing through a tiny gap.

The 5090 Problem Shows Why "Maximum GPU Length" Is Misleading

Let's put the current numbers side by side.

Graphics CardOfficial LengthWidth / HeightThicknessBoard PowerNVIDIA GeForce RTX 5090 FE304 mm137 mm2-slot card; NVIDIA advises planning a 61 mm case envelope575 W TGPNVIDIA GeForce RTX 5080 FE304 mm137 mm2-slot360 W TGPASUS ROG Astral RTX 5090357.6 mm149.3 mm76 mm / 3.8-slotRTX 5090-classAMD Radeon RX 7900 XTX Reference287 mmModel-specific width2.5-slot355 W typical board power

The lesson is not that every PC needs a gigantic case.

GPU dimensions vary far more than the GPU name suggests

 guideline around a defined physical envelope: up to 

304 mm long, 151 mm high including power-cable bend radius, and 50 mm or 2.5 slots thick

That framework exists because physical compatibility has become important enough to require more precise language.

And I think the mainstream ATX market should learn from it.

"Supports GPUs up to 400 mm" tells me something.

"Supports RTX 5090" tells me almost nothing.

Nominal GPU Margin = Case Maximum GPU Length − Actual GPU Length

If your case provides 400 mm of GPU clearance and your card measures 357.6 mm:

Usable GPU Margin = Published GPU Clearance − GPU Length − Front-Side Obstructions

 goes deeper into this interaction, and it is worth checking whenever a front-mounted radiator shares the same longitudinal space as the GPU.

But install a 30 mm obstruction in the GPU path and suddenly only 6 mm remains.

Example 2: A 357.6 mm GPU in a 400 mm Case

You have useful room for installation, airflow, and some tolerance.

Example 3: A 357.6 mm GPU in a 360 mm Case

A 2.4 mm margin leaves almost no tolerance for manufacturing variation, installation angle, brackets, cables, fan frames, or future changes.

That is a specification-sheet victory and a builder's headache.

Front Radiators Can Destroy GPU Length Clearance

This mistake keeps appearing because buyers see:

Then they mentally combine both numbers as if those pieces occupy different dimensions.

A front-mounted radiator and its fans can consume 

, depending on the exact radiator and fan combination.

If a case's published GPU-clearance specification assumes no front radiator, your 400 mm case could effectively become something closer to a 350 mm GPU environment after the cooling hardware is installed.

How much GPU clearance do you really need? Learn how to calculate GPU length, width, cable, radiator, and airflow clearance for modern PC cases.

Acegeek offers high-quality computer cases, cooling solutions, power supplies, and peripherals. Explore our website for top-notch products & accessories.

Blog

Currently Browsing：Graphics Card Clearance